Show Monitor - Cisco Catalyst 3030 Command Reference Manual

show monitor

show monitor
Use the show monitor user EXEC command to display information about all Switched Port Analyzer
(SPAN) and Remote SPAN (RSPAN) sessions on the switch. Use the command with keywords to show
a specific session, all sessions, all local sessions, or all remote sessions.
Syntax Description
session
session_number
all
local
range list
remote
detail
| begin
| exclude
| include
expression
Command Modes User EXEC
Command History Release
12.2(25)SEE
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
The output is the same for the show monitor command and the show monitor session all command.
Cisco Catalyst Blade Switch 3030 Command Reference
2-376
show monitor [session {session_number | all | local | range list | remote} [detail]] [ | {begin |
exclude | include} expression]
(Optional) Display information about specified SPAN sessions.
Specify the number of the SPAN or RSPAN session. The range is 1 to 66.
Display all SPAN sessions.
Display only local SPAN sessions.
Display a range of SPAN sessions, where list is the range of valid sessions,
either a single session or a range of sessions described by two numbers, the
lower one first, separated by a hyphen. Do not enter any spaces between
comma-separated parameters or in hyphen-specified ranges.
Note
Display only remote SPAN sessions.
(Optional) Display detailed information about the specified sessions.
Display begins with the line that matches the expression.
Display excludes lines that match the expression.
Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Chapter 2 Cisco Catalyst Blade Switch 3030 Cisco IOS Commands
This keyword is available only in privileged EXEC mode.
78-17262-01