Show Errdisable Detect - Cisco Catalyst 3030 Command Reference Manual

Blade switch

Hide thumbs Also See for Catalyst 3030:

Table of Contents

Chapter 2 Cisco Catalyst Blade Switch 3030 Cisco IOS Commands

show errdisable detect

Use the show errdisable detect user EXEC command to display error-disabled detection status.

Syntax Description

Command Modes

Command History

Usage Guidelines

Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output

are not displayed, but the lines that contain Output are displayed.

This is an example of output from the show errdisable detect command:

Switch> show errdisable detect

ErrDisable Reason

-----------------

security-violatio

channel-misconfig

psecure-violation

gbic-invalid

dhcp-rate-limit

unicast-flood

storm-control

Though visible in the output, the ilpower, storm-control, and unicast-flood fields are not valid.

show errdisable detect [ | {begin | exclude | include} expression]

(Optional) Display begins with the line that matches the expression.

(Optional) Display excludes lines that match the expression.

(Optional) Display includes lines that match the specified expression.

Expression in the output to use as a reference point.

Modification

This command was introduced.

error reason refers to an invalid small form-factor pluggable (SFP) module.

gbic-invalid

Detection status

----------------

Cisco Catalyst Blade Switch 3030 Command Reference

show errdisable detect