Debug Platform Matm - Cisco Catalyst 3030 Command Reference Manual

debug platform matm

debug platform matm
Use the debug platform matm privileged EXEC command to enable debugging of platform-dependent
MAC address management. Use the no form of this command to disable debugging.
Syntax Description aging
all
ec-aging
errors
learning
rpc
secure-address
warning
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.2(25)SEE
Usage Guidelines The undebug platform matm command is the same as the no debug platform matm command.
Cisco Catalyst Blade Switch 3030 Command Reference
B-36
debug platform matm {aging | all | ec-aging | errors | learning | rpc | secure-address | warnings}
no debug platform matm {aging | all | ec-aging | errors | learning | rpc | secure-address |
warnings}
Display MAC address aging debug messages.
Display all platform MAC address management event debug messages.
Display EtherChannel address aging-related debug messages.
Display MAC address management error messages.
Display MAC address management address-learning debug messages.
Display MAC address management remote procedure call (RPC) related debug
messages.
Display MAC address management secure address learning debug messages.
Display MAC address management warning messages.
Modification
This command was introduced.
Appendix B Cisco Catalyst Blade Switch 3030 Debug Commands
78-17262-01