Show Platform Layer4Op - Cisco Catalyst 3030 Command Reference Manual

show platform layer4op

show platform layer4op
Use the show platform layer4op privileged EXEC command to display platform-dependent Layer 4
operator information.
Syntax Description
acl
pacl [port-asic]
qos [port-asic]
and-or
map
or-and
vcu
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History Release
12.2(25)SEE
Usage Guidelines
You should use this command only when you are working directly with a technical support representative
while troubleshooting a problem. Do not use this command unless a technical support representative asks
you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Cisco Catalyst Blade Switch 3030 Command Reference
C-10
show platform layer4op {acl | pacl [port-asic] | qos [port-asic]} {and-or | map | or-and | vcu} [
| {begin | exclude | include} expression]
Display access control list (ACL) Layer 4 operators information.
Display port ACL Layer 4 operators information. The keyword has this meaning:
port-asic—(Optional) Port ASIC number.
•
Display quality of service (QoS) Layer 4 operators information. The keyword has
this meaning:
port-asic—(Optional) QoS port ASIC number.
•
Display AND-OR registers information.
Display select map information.
Display OR-AND registers information.
Display value compare unit (VCU) register information.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Appendix C Cisco Catalyst Blade Switch 3030 Show Platform Commands
78-17262-01