Cisco Catalyst 3030 Command Reference Manual page 291

Chapter 2 Cisco Catalyst Blade Switch 3030 Cisco IOS Commands
[0] Go to the IOS command prompt without saving this config.
[1] Return back to the setup without saving this config.
[2] Save this configuration to nvram and exit.
Enter your selection [2]:
Related Commands Command
show running-config
show version
78-17262-01
Description
Displays the running configuration on the switch. For syntax
information, select Cisco IOS Configuration Fundamentals
Command Reference, Release 12.2 > File Management Commands
> Configuration File Management Commands.
Displays version information for the hardware and firmware.
Cisco Catalyst Blade Switch 3030 Command Reference
setup
2-263