Show Platform Snmp Counters - Cisco Catalyst 3030 Command Reference Manual

Appendix C Cisco Catalyst Blade Switch 3030 Show Platform Commands

show platform snmp counters

Use the show platform snmp counters privileged EXEC command to display platform-dependent
Simple Network Management Protocol (SNMP) counter information.
Syntax Description
| begin
| exclude
| include
expression
Command Modes Privileged EXEC
Command History Release
12.2(25)SEE
Usage Guidelines You should use this command only when you are working directly with your technical support
representative while troubleshooting a problem. Do not use this command unless your technical support
representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
78-17262-01
show platform snmp counters [ | {begin | exclude | include} expression]
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Cisco Catalyst Blade Switch 3030 Command Reference
show platform snmp counters
C-25