Show Mac Address-Table Static - Cisco Catalyst 3030 Command Reference Manual

show mac address-table static

show mac address-table static
Use the show mac address-table static user EXEC command to display only static MAC address table
entries.
Syntax Description
address mac-address
interface interface-id
vlan vlan-id
| begin
| exclude
| include
expression
Command Modes User EXEC
Command History Release
12.2(25)SEE
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show mac address-table static command:
Switch>
------------------------------------------
Vlan
----
All
All
All
All
All
All
4
6
Total Mac Addresses for this criterion: 8
Cisco Catalyst Blade Switch 3030 Command Reference
2-358
show mac address-table static [address mac-address] [interface interface-id] [vlan vlan-id]
[ | {begin | exclude | include} expression]
(Optional) Specify a 48-bit MAC address; the valid format is H.H.H
(available in privileged EXEC mode only).
(Optional) Specify an interface to match; valid interfaces include physical
ports and port channels.
(Optional) Display addresses for a specific VLAN. The range is 1 to 4094.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
show mac address-table static
Mac Address Table
Mac Address Type
----------- ----
0100.0ccc.cccc STATIC
0180.c200.0000 STATIC
0100.0ccc.cccd STATIC
0180.c200.0001 STATIC
0180.c200.0004 STATIC
0180.c200.0005 STATIC
0001.0002.0004 STATIC
0001.0002.0007 STATIC
Chapter 2 Cisco Catalyst Blade Switch 3030 Cisco IOS Commands
Ports
-----
CPU
CPU
CPU
CPU
CPU
CPU
Drop
Drop
78-17262-01