Flash_Init - Cisco Catalyst 3030 Command Reference Manual

Appendix A Cisco Catalyst Blade Switch 3030 Boot Loader Commands

flash_init

Use the flash_init boot loader command to initialize the flash file system.
Syntax Description This command has no arguments or keywords.
Defaults The flash file system is automatically initialized during normal system operation.
Command Modes
Boot loader
Command History Release
12.2(25)SEE
Usage Guidelines
During the normal boot process, the flash file system is automatically initialized.
Use this command to manually initialize the flash file system. For example, you use this command
during the recovery procedure for a lost or forgotten password.
78-17262-01
flash_init
Modification
This command was introduced.
Cisco Catalyst Blade Switch 3030 Command Reference
flash_init
A-9