Cisco Catalyst 3030 Command Reference Manual page 410

show mvr interface
In the preceding display, Status is defined as follows:
•
•
•
This is an example of output from the show mvr interface command for a specified port:
Switch# show mvr interface gigabitethernet0/2
Type: RECEIVER Status: ACTIVE Immediate Leave: DISABLED
This is an example of output from the show mvr interface interface-id members command:
Switch# show mvr interface gigabitethernet0/2 members
239.255.0.0
239.255.0.1
239.255.0.2
239.255.0.3
239.255.0.4
239.255.0.5
239.255.0.6
239.255.0.7
239.255.0.8
239.255.0.9
Related Commands Command
mvr (global configuration)
mvr (interface configuration)
show mvr
show mvr members
Cisco Catalyst Blade Switch 3030 Command Reference
2-382
Active means the port is part of a VLAN.
Up/Down means that the port is forwarding/nonforwarding.
Inactive means that the port is not yet part of any VLAN.
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
Chapter 2 Cisco Catalyst Blade Switch 3030 Cisco IOS Commands
Description
Enables and configures multicast VLAN registration on the
switch.
Configures MVR ports.
Displays the global MVR configuration on the switch.
Displays all receiver ports that are members of an MVR
multicast group.
78-17262-01