Cisco Catalyst 3030 Command Reference Manual page 101

Chapter 2 Cisco Catalyst Blade Switch 3030 Cisco IOS Commands
Examples This example shows how to enable MAC authentication bypass and to configure the switch to use EAP
for authentication:
Switch(config-if)# dot1x mac-auth-bypass eap
You can verify your settings by entering the show dot1x [interface interface-id] privileged EXEC
command.
Related Commands Command
show dot1x
interface-id]
78-17262-01
Description
[interface Displays IEEE 802.1x status for the specified port.
Cisco Catalyst Blade Switch 3030 Command Reference
dot1x mac-auth-bypass
2-73