Debug Platform Supervisor-Asic - Cisco Catalyst 3030 Command Reference Manual

debug platform supervisor-asic

debug platform supervisor-asic
Use the debug platform supervisor-asic privileged EXEC command to enable debugging of the
supervisor application-specific integrated circuit (ASIC). Use the no form of this command to disable
debugging.
Syntax Description all
errors
receive
send
Defaults Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.2(25)SEE
Usage Guidelines
The undebug platform supervisor-asic command is the same as the no debug platform
supervisor-asic command.
Related Commands Command
show debugging
Cisco Catalyst Blade Switch 3030 Command Reference
B-50
debug platform supervisor-asic {all | errors | receive | send}
no debug platform supervisor-asic {all | errors | receive | send}
Display all supervisor-ASIC event debug messages.
Display the supervisor-ASIC error debug messages.
Display the supervisor-ASIC receive debug messages.
Display the supervisor-ASIC send debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled. For
syntax information, see the Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.
Appendix B Cisco Catalyst Blade Switch 3030 Debug Commands
78-17262-01