Cisco Catalyst 3030 Command Reference Manual page 509

Chapter 2 Cisco Catalyst Blade Switch 3030 Cisco IOS Commands
Examples This example shows how to set speed on a port to 100 Mbps:
Switch(config)# interface gigabitethernet0/1
Switch(config-if)# speed 100
This example shows how to set a port to autonegotiate at only 10 Mbps:
Switch(config)# interface gigabitethernet0/1
Switch(config-if)# speed auto 10
This example shows how to set a port to autonegotiate at only 10 or 100 Mbps:
Switch(config)# interface gigabitethernet0/1
Switch(config-if)# speed auto 10 100
You can verify your settings by entering the show interfaces privileged EXEC command.
Related Commands Command
duplex
show interfaces
78-17262-01
Description
Specifies the duplex mode of operation.
Displays the statistical information specific to all interfaces or to a specific
interface.
Cisco Catalyst Blade Switch 3030 Command Reference
speed
2-481