Cisco Catalyst 3030 Command Reference Manual page 658

debug platform phy
Usage Guidelines The undebug platform phy command is the same as the no debug platform phy command.
Related Commands Command
show debugging
Cisco Catalyst Blade Switch 3030 Command Reference
B-40
Appendix B
Description
Displays information about the types of debugging that are enabled. For
syntax information, see the Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.
Cisco Catalyst Blade Switch 3030 Debug Commands
78-17262-01