Cisco Catalyst 3030 Command Reference Manual page 345

Chapter 2 Cisco Catalyst Blade Switch 3030 Cisco IOS Commands
Port
-------
Gi0/3
Related Commands Command
switchport access
switchport block
switchport backup interface
switchport mode
switchport protected
switchport trunk
78-17262-01
(dBm) (dBm)
----------------- ----------
N/A ( -0.0) -- -0.0
Description
Configures a port as a static-access or a dynamic-access port.
Blocks unknown unicast or multicast traffic on an interface.
Configures Flex Links, a pair of Layer 2 interfaces that provide mutual
backup.
Configures the VLAN membership mode of a port.
Isolates unicast, multicast, and broadcast traffic at Layer 2 from other
protected ports on the same switch.
pruning Configures the VLAN pruning-eligible list for ports in trunking mode.
(dBm) (dBm) (dBm)
--------- --------- ---------
-0.0 -0.0 -0.0
Cisco Catalyst Blade Switch 3030 Command Reference
show interfaces
2-317