Debug Platform Acl - Cisco Catalyst 3030 Command Reference Manual

Appendix B Cisco Catalyst Blade Switch 3030 Debug Commands

debug platform acl

Use the debug platform acl privileged EXEC command to enable debugging of the access control list
(ACL) manager. Use the no form of this command to disable debugging.
Syntax Description all
exit
label
main
vacl
vlmap
warn
Though visible in the command-line help strings, the racl and stack keywords are not supported.
Note
Defaults Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.2(25)SEE
Usage Guidelines
The undebug platform acl command is the same as the no debug platform acl command.
Related Commands Command
show debugging
78-17262-01
debug platform acl {all | exit | label | main | vacl | vlmap | warn}
no debug platform acl {all | exit | label | main | vacl | vlmap | warn}
Display all ACL manager debug messages.
Display ACL exit-related debug messages.
Display ACL label-related debug messages.
Display the main or important ACL debug messages.
Display VLAN ACL-related debug messages.
Display ACL VLAN-map-related debug messages.
Display ACL warning-related debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled. For
syntax information, select Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.
Cisco Catalyst Blade Switch 3030 Command Reference
debug platform acl
B-25