Debug Spanning-Tree Bpdu-Opt - Cisco Catalyst 3030 Command Reference Manual

debug spanning-tree bpdu-opt

debug spanning-tree bpdu-opt
Use the debug spanning-tree bpdu-opt privileged EXEC command to enable debugging of optimized
spanning-tree bridge protocol data units (BPDUs) handling. Use the no form of this command to disable
debugging.
Syntax Description detail
packet
Defaults
Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.2(25)SEE
Usage Guidelines The undebug spanning-tree bpdu-opt command is the same as the no debug spanning-tree bpdu-opt
command.
Related Commands Command
show debugging
show spanning-tree
Cisco Catalyst Blade Switch 3030 Command Reference
B-64
debug spanning-tree bpdu-opt [detail | packet]
no debug spanning-tree bpdu-opt [detail | packet]
(Optional) Display detailed optimized BPDU-handling debug messages.
(Optional) Display packet-level optimized BPDU-handling debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled. For
syntax information, select Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.
Displays spanning-tree state information.
Appendix B Cisco Catalyst Blade Switch 3030 Debug Commands
78-17262-01