Cisco Catalyst 3030 Command Reference Manual page 365

Chapter 2 Cisco Catalyst Blade Switch 3030 Cisco IOS Commands
This is an example of output from the show lacp neighbor command:
Switch> show lacp neighbor
Flags:
Channel group 3 neighbors
Partner's information:
Port
Gi0/1
Partner's information:
Port
Gi0/2
This is an example of output from the show lacp sys-id command:
Switch> show lacp sys-id
32765,0002.4b29.3a00
The system identification is made up of the system priority and the system MAC address. The first two
bytes are the system priority, and the last six bytes are the globally administered individual MAC address
associated to the system.
Related Commands Command
clear lacp
lacp port-priority
lacp system-priority
78-17262-01
S - Device is sending Slow LACPDUs F - Device is sending Fast LACPDUs
A - Device is in Active mode
Partner
System ID
32768,0007.eb49.5e80
LACP Partner
Port Priority
32768
Partner
System ID
32768,0007.eb49.5e80
LACP Partner
Port Priority
32768
Description
Clears the LACP channel-group information.
Configures the LACP port priority.
Configures the LACP system priority.
P - Device is in Passive mode
Partner
Port Number Age
0xC 19s
Partner Partner
Oper Key Port State
0x3 0x3C
Partner
Port Number Age
0xD 15s
Partner Partner
Oper Key Port State
0x3 0x3C
Cisco Catalyst Blade Switch 3030 Command Reference
show lacp
Partner
Flags
SP
Partner
Flags
SP
2-337