Debug Eap - Cisco Catalyst 3030 Command Reference Manual

debug eap

debug eap
Use the debug eap privileged EXEC command to enable debugging of the Extensible Authentication
Protocol (EAP) activity. Use the no form of this command to disable debugging.
Syntax Description all
authenticator
errors
events
md5
packets
peer
sm
Command Default Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.2(25)SEE
Usage Guidelines
The undebug dot1x command is the same as the no debug dot1x command.
Cisco Catalyst Blade Switch 3030 Command Reference
B-8
debug dot1x {all | authenticator | errors | events | md5 | packets | peer | sm}
no debug dot1x {all | authenticator | errors | events | md5 | packets | peer | sm}
Display all EAP debug messages.
Display authenticator debug messages.
Display EAP error debug messages.
Display EAP event debug messages.
Display EAP-MD5 debug messages.
Display EAP packet debug messages.
Display EAP peer debug messages.
Display EAP state-machine related-events debug messages.
Modification
This command was introduced.
Appendix B Cisco Catalyst Blade Switch 3030 Debug Commands
78-17262-01