Cisco Catalyst 3030 Command Reference Manual page 187

Chapter 2 Cisco Catalyst Blade Switch 3030 Cisco IOS Commands
Examples This example shows how to enable the MAC address-table notification feature, set the interval time to
60 seconds, and set the history-size to 100 entries:
Switch(config)# mac address-table notification
Switch(config)# mac address-table notification interval 60
Switch(config)# mac address-table notification history-size 100
You can verify your settings by entering the show mac address-table notification privileged EXEC
command.
Related Commands Command
clear mac address-table
show mac address-table notification
snmp-server enable traps
snmp trap mac-notification
78-17262-01
Description
notification Clears the MAC address notification global counters.
Displays the MAC address notification settings on all
interfaces or on the specified interface.
Sends the SNMP MAC notification traps when the
mac-notification keyword is appended.
Enables the SNMP MAC notification trap on a specific
interface.
Cisco Catalyst Blade Switch 3030 Command Reference
mac address-table notification
2-159