Link State Track - Cisco Catalyst 3030 Command Reference Manual

link state track

link state track
Use the link state track global configuration command to enable a link-state group. Use the no form of
this command to disable a link-state group.
Syntax Description number
Defaults
Link-state tracking is disabled for all groups.
Command Modes Global configuration
Command History Release
12.2(25)SEE
Examples This example shows how enable link-state group 2:
Switch(config)# link state track 2
You can verify your settings by entering the show running-config privileged EXEC command.
Related Commands Command
link state group
show link state group
show running-config
Cisco Catalyst Blade Switch 3030 Command Reference
2-148
link state track [number]
no link state track [number]
Modification
This command was introduced.
Description
Configures an interface as a member of a link-state group.
Displays the link-state group information.
Displays the current operating configuration. For syntax information,
select Cisco IOS Configuration Fundamentals Command Reference
for Release 12.2 > Cisco IOS File Management Commands >
Configuration File Commands.
Chapter 2
(Optional) Specify the link-state group number. The group number can
be 1 or 2, the default is 1.
Cisco Catalyst Blade Switch 3030 Cisco IOS Commands
78-17262-01