Cisco Catalyst 3030 Command Reference Manual page 300

show auto qos
These are examples of output from the show auto qos interface interface-id command when auto-QoS
is disabled on an interface:
Switch> show auto qos interface gigabitethernet0/1
AutoQoS is disabled
Related Commands Command
auto qos voip
debug auto qos
Cisco Catalyst Blade Switch 3030 Command Reference
2-272
Chapter 2 Cisco Catalyst Blade Switch 3030 Cisco IOS Commands
Description
Automatically configures QoS for VoIP within a QoS domain.
Enables debugging of the auto-QoS feature.
78-17262-01