Cisco Catalyst 3030 Command Reference Manual page 78

define interface-range
When you define a range, you must enter a space before the hyphen (-), for example:
gigabitethernet0/1 - 2
You can also enter multiple ranges. When you define multiple ranges, you must enter a space after the
first entry before the comma (,). The space after the comma is optional, for example:
Examples This example shows how to create a multiple-interface macro:
Switch(config)# define interface-range macro1 gigabitethernet0/1 - 2
Related Commands Command
interface range
show running-config
Cisco Catalyst Blade Switch 3030 Command Reference
2-50
Chapter 2
Description
Executes a command on multiple ports at the same time.
Displays the current operating configuration, including defined
macros. For syntax information, select Cisco IOS Configuration
Fundamentals Command Reference, Release 12.2 > File Management
Commands > Configuration File Management Commands.
Cisco Catalyst Blade Switch 3030 Cisco IOS Commands
78-17262-01