Cisco Catalyst 3030 Command Reference Manual page 332

show errdisable recovery
Timer interval:300 seconds
Interfaces that will be enabled at the next timeout:
Interface
---------
Gi0/2
Though visible in the output, the unicast-flood field is not valid.
Note
Related Commands Command
errdisable recovery
show errdisable detect
show errdisable flap-values
show interfaces
Cisco Catalyst Blade Switch 3030 Command Reference
2-304
Errdisable reason
-----------------
link-flap 279
Description
Configures the recover mechanism variables.
Displays error-disabled detection status.
Displays error condition recognition information.
status Displays interface status or a list of interfaces in error-disabled state.
Chapter 2 Cisco Catalyst Blade Switch 3030 Cisco IOS Commands
Time left(sec)
--------------
78-17262-01