Cisco Catalyst 3030 Command Reference Manual page 363

Chapter 2 Cisco Catalyst Blade Switch 3030 Cisco IOS Commands
Examples This is an example of output from the show lacp counters user EXEC command.
the fields in the display.
Switch> show lacp counters
Port
---------------------------------------------------------------------
Channel group:1
Gi0/1
Gi0/2
Table 2-22
Field
LACPDUs Sent and Recv
Marker Sent and Recv
Marker Response Sent and Recv
LACPDUs Pkts and Err
This is an example of output from the show lacp internal command:
Switch> show lacp 1 internal
Flags:
Channel group 1
Port
Gi0/1
Gi0/2
78-17262-01
LACPDUs
Sent Recv Sent
19 10 0
14 6 0
show lacp counters Field Descriptions
S - Device is requesting Slow LACPDUs
F - Device is requesting Fast LACPDUs
A - Device is in Active mode
LACP port
Flags State Priority
SA bndl 32768
SA bndl 32768
Marker Marker Response
Recv Sent Recv
0 0 0
0 0 0
Description
The number of LACP packets sent and received by a port.
The number of LACP marker packets sent and received by a port.
The number of LACP marker response packets sent and received
by a port.
The number of unknown and illegal packets received by LACP
for a port.
P - Device is in Passive mode
Admin
Key
0x3
0x3
Cisco Catalyst Blade Switch 3030 Command Reference
Table 2-22
LACPDUs
Pkts Err
0
0
Oper Port Port
Key Number State
0x3 0x4 0x3D
0x3 0x5 0x3D
show lacp
describes
2-335