Debug Platform Udld - Cisco Catalyst 3030 Command Reference Manual

debug platform udld

debug platform udld
Use the debug platform udld privileged EXEC command to enable debugging of the
platform-dependent UniDirectional Link Detection (UDLD) software. Use the no form of this command
to disable debugging.
Syntax Description all
error
rpc {events | messages}
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.2(25)SEE
Usage Guidelines
The undebug platform udld command is the same as the no debug platform udld command.
Related Commands Command
show debugging
Cisco Catalyst Blade Switch 3030 Command Reference
B-54
debug platform udld [all | error | rpc {events | messages}]
no debug platform udld [all | error | rpc {events | messages}]
(Optional) Display all UDLD debug messages.
(Optional) Display error condition debug messages.
(Optional) Display UDLD remote procedure call (RPC) debug messages.
The keywords have these meanings:
•
•
Modification
This command was introduced.
Description
Displays information about the Cisco IOS Release 12.2 Configuration
Guides and Command References > Cisco IOS Configuration
Fundamentals Configuration Guide, Release 12.2 > System Management
> Troubleshooting and Fault Management.
Appendix B
events—Display UDLD RPC events.
messages—Display UDLD RPC messages.
Cisco Catalyst Blade Switch 3030 Debug Commands
78-17262-01