Cisco Catalyst 3030 Command Reference Manual page 165

Chapter 2 Cisco Catalyst Blade Switch 3030 Cisco IOS Commands
Examples This example shows how to configure a port as a multicast router port:
Switch(config)# ip igmp snooping vlan 1 mrouter interface gigabitethernet0/2
This example shows how to specify the multicast router learning method as CGMP:
Switch(config)# ip igmp snooping vlan 1 mrouter learn cgmp
You can verify your settings by entering the show ip igmp snooping privileged EXEC command.
Related Commands Command
ip igmp snooping report-suppression
show ip igmp snooping
show ip igmp snooping groups
show ip igmp snooping mrouter
show ip igmp snooping querier
78-17262-01
Description
Enables IGMP report suppression.
Displays the snooping configuration.
Displays IGMP snooping multicast information.
Displays the IGMP snooping router ports.
Displays the configuration and operation information for
the IGMP querier configured on a switch.
Cisco Catalyst Blade Switch 3030 Command Reference
ip igmp snooping vlan mrouter
2-137