Mls Qos Srr-Queue Input Dscp-Map - Cisco Catalyst 3030 Command Reference Manual

Chapter 2 Cisco Catalyst Blade Switch 3030 Cisco IOS Commands

mls qos srr-queue input dscp-map

Use the mls qos srr-queue input dscp-map global configuration command to map Differentiated
Services Code Point (DSCP) values to an ingress queue or to map DSCP values to a queue and to a
threshold ID. Use the no form of this command to return to the default setting.
Syntax Description queue queue-id
dscp1...dscp8
threshold threshold-id
dscp1...dscp8
Defaults Table 2-11
Table 2-11
DSCP Value
0–39
40–47
48–63
Command Modes Global configuration
Command History Release
12.2(25)SEE
78-17262-01
mls qos srr-queue input dscp-map queue queue-id {dscp1...dscp8 | threshold threshold-id
dscp1...dscp8}
no mls qos srr-queue input dscp-map
Specify a queue number.
For queue-id, the range is 1 to 2.
Map DSCP values to an ingress queue.
For dscp1...dscp8, enter up to eight values, and separate each value with a
space. The range is 0 to 63.
Map DSCP values to a queue threshold ID.
For threshold-id, the range is 1 to 3.
For dscp1...dscp8, enter up to eight values, and separate each value with a
space. The range is 0 to 63.
shows the default DSCP input queue threshold map:
Default DSCP Input Queue Threshold Map
Queue ID–Threshold ID
1–1
2–1
1–1
Modification
This command was introduced.
mls qos srr-queue input dscp-map
Cisco Catalyst Blade Switch 3030 Command Reference
2-203