Debug Platform Port-Asic - Cisco Catalyst 3030 Command Reference Manual

Appendix B Cisco Catalyst Blade Switch 3030 Debug Commands

debug platform port-asic

Use the debug platform port-asic privileged EXEC command to enable debugging of the port
application-specific integrated circuit (ASIC) driver. Use the no form of this command to disable
debugging.
Syntax Description interrupt
periodic
read
write
Though visible in the command-line help strings, the stack keyword is not supported.
Note
Defaults Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.2(25)SEE
Usage Guidelines
The undebug platform port-asic command is the same as the no debug platform port-asic command.
Related Commands Command
show debugging
78-17262-01
debug platform port-asic {interrupt | periodic | read | write}
no debug platform port-asic {interrupt | periodic | read | write}
Display port-ASIC interrupt-related function debug messages.
Display port-ASIC periodic-function-call debug messages.
Display port-ASIC read debug messages.
Display port-ASIC write debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled. For
syntax information, see the Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.
Cisco Catalyst Blade Switch 3030 Command Reference
debug platform port-asic
B-43