Cisco Catalyst 3030 Command Reference Manual page 529

Chapter 2 Cisco Catalyst Blade Switch 3030 Cisco IOS Commands
Examples This example shows how to cause a port to refrain from negotiating trunking mode and to act as a trunk
or access port (depending on the mode set):
Switch(config)# interface gigabitethernet0/1
Switch(config-if)# switchport nonegotiate
You can verify your setting by entering the show interfaces interface-id switchport privileged EXEC
command.
Related Commands Command
show interfaces
switchport mode
78-17262-01
Description
switchport Displays the administrative and operational status of a switching port,
including port blocking and port protection settings.
Configures the VLAN membership mode of a port.
Cisco Catalyst Blade Switch 3030 Command Reference
switchport nonegotiate
2-501