Cisco Catalyst 3030 Command Reference Manual page 182

mac access-list extended
Examples This example shows how to create a MAC named extended access list named mac1 and to enter extended
MAC access-list configuration mode:
Switch(config)# mac access-list extended mac1
Switch(config-ext-macl)#
This example shows how to delete MAC named extended access list mac1:
Switch(config)# no mac access-list extended mac1
You can verify your settings by entering the show access-lists privileged EXEC command.
Related Commands Command
deny (MAC access-list
configuration)
permit (MAC
access-list
configuration)
show access-lists
vlan access-map
Cisco Catalyst Blade Switch 3030 Command Reference
2-154
Chapter 2
Description
Configures the MAC ACL (in extended MAC-access list configuration
mode).
Displays the access lists configured on the switch.
Defines a VLAN map and enters access-map configuration mode where you
can specify a MAC ACL to match and the action to be taken.
Cisco Catalyst Blade Switch 3030 Cisco IOS Commands
78-17262-01