Cisco Catalyst 3030 Command Reference Manual page 337

Chapter 2 Cisco Catalyst Blade Switch 3030 Cisco IOS Commands
This is an example of output from the show flowcontrol interface interface-id command:
Switch> show flowcontrol gigabitethernet0/2
Port
---------
Gi0/2
Related Commands Command
flowcontrol
78-17262-01
Send FlowControl Receive FlowControl
admin oper admin
-------- -------- -------- --------
desired off off
Description
Sets the receive flow-control state for an interface.
RxPause TxPause
oper
------- -------
off 0 0
Cisco Catalyst Blade Switch 3030 Command Reference
show flowcontrol
2-309