Cisco Catalyst 3030 Command Reference Manual page 457
Blade switch
Hide thumbs
Also See for Catalyst 3030:
- Getting started manual (34 pages) ,
- Getting started (122 pages)
Table of Contents
Advertisement
Chapter 2 Cisco Catalyst Blade Switch 3030 Cisco IOS Commands
community-string
notification-type
Though visible in the command-line help strings, the cpu, cluster, hsrp, msdp, ospf, pim, vrf, and
Note
fru-ctrl keywords are not supported.
78-17262-01
Password-like community string sent with the notification operation. Though
you can set this string by using the snmp-server host command, we
recommend that you define this string by using the snmp-server community
global configuration command before using the snmp-server host
command.
(Optional) Type of notification to be sent to the host. If no type is specified,
all notifications are sent. The notification type can be one or more of the
these keywords:
bridge—Send SNMP Spanning Tree Protocol (STP) bridge MIB traps.
•
cluster—Send cluster member status traps.
•
config—Send SNMP configuration traps.
•
copy-config—Send SNMP copy configuration traps.
•
entity— Send SNMP entity traps.
•
•
envmon—Send environmental monitor traps.
•
flash—Send SNMP FLASH notifications.
hsrp—Send SNMP Hot Standby Router Protocol (HSRP) traps.
•
ipmulticast—Send SNMP IP multicast routing traps.
•
mac-notification—Send SNMP MAC notification traps.
•
msdp—Send SNMP Multicast Source Discovery Protocol (MSDP)
•
traps.
ospf—Send Open Shortest Path First (OSPF) traps.
•
pim—Send SNMP Protocol-Independent Multicast (PIM) traps.
•
port-security—Send SNMP port-security traps.
•
rtr—Send SNMP Response Time Reporter traps.
•
•
snmp—Send SNMP-type traps.
storm-control—Send SNMP storm-control traps.
•
stpx—Send SNMP STP extended MIB traps.
•
syslog—Send SNMP syslog traps.
•
tty—Send TCP connection traps.
•
udp-port port—Configure the User Datagram Protocol (UDP) port
•
number of the host to receive the traps. The range is from 0 to 65535.
vlan-membership— Send SNMP VLAN membership traps.
•
vlancreate—Send SNMP VLAN-created traps.
•
vlandelete—Send SNMP VLAN-deleted traps.
•
•
vtp—Send SNMP VLAN Trunking Protocol (VTP) traps.
Cisco Catalyst Blade Switch 3030 Command Reference
snmp-server host
2-429
Advertisement
Table of Contents
