Debug Platform Vlan - Cisco Catalyst 3030 Command Reference Manual

Appendix B Cisco Catalyst Blade Switch 3030 Debug Commands

debug platform vlan

Use the debug platform vlan privileged EXEC command to enable debugging of the VLAN manager
software. Use the no form of this command to disable debugging.
Syntax Description errors
mvid
rpc
Defaults Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.2(25)SEE
Usage Guidelines
The undebug platform vlan command is the same as the no debug platform vlan command.
Related Commands Command
show debugging
78-17262-01
debug platform vlan {errors | mvid | rpc}
no debug platform vlan {errors | mvid | rpc}
Display VLAN error debug messages.
Display mapped VLAN ID allocations and free debug messages.
Display remote procedure call (RPC) debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled. For
syntax information, see the Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.
Cisco Catalyst Blade Switch 3030 Command Reference
debug platform vlan
B-55