Reset - Cisco Catalyst 3030 Command Reference Manual

reset

reset
Use the reset boot loader command to perform a hard reset on the system. A hard reset is similar to
power-cycling the switch, clearing the processor, registers, and memory.
Syntax Description
This command has no arguments or keywords.
Command Modes Boot loader
Command History Release
12.2(25)SEE
Examples This example shows how to reset the system:
switch: reset
Are you sure you want to reset the system (y/n)?y
System resetting...
Related Commands Command
boot
Cisco Catalyst Blade Switch 3030 Command Reference
A-18
reset
Modification
This command was introduced.
Description
Loads and boots an executable image and enters the command-line interface.
Appendix A Cisco Catalyst Blade Switch 3030 Boot Loader Commands
78-17262-01