Debug Spanning-Tree Backbonefast - Cisco Catalyst 3030 Command Reference Manual

debug spanning-tree backbonefast

debug spanning-tree backbonefast
Use the debug spanning-tree backbonefast privileged EXEC command to enable debugging of
spanning-tree BackboneFast events. Use the no form of this command to disable debugging.
Syntax Description detail
exceptions
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.2(25)SEE
Usage Guidelines The undebug spanning-tree backbonefast command is the same as the no debug spanning-tree
backbonefast command.
Related Commands Command
show debugging
show spanning-tree
Cisco Catalyst Blade Switch 3030 Command Reference
B-62
debug spanning-tree backbonefast [detail | exceptions]
no debug spanning-tree backbonefast [detail | exceptions]
(Optional) Display detailed BackboneFast debug messages.
(Optional) Display spanning-tree BackboneFast-exception debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled. For
syntax information, select Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.
Displays spanning-tree state information.
Appendix B Cisco Catalyst Blade Switch 3030 Debug Commands
78-17262-01