Show Vmps - Cisco Catalyst 3030 Command Reference Manual

show vmps

show vmps
Use the show vmps user EXEC command without keywords to display the VLAN Query Protocol (VQP)
version, reconfirmation interval, retry count, VLAN Membership Policy Server (VMPS) IP addresses,
and the current and primary servers, or use the statistics keyword to display client-side statistics.
Syntax Description
statistics
| begin
| exclude
| include
expression
Command Modes User EXEC
Command History Release
12.2(25)SEE
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show vmps command:
Switch> show vmps
VQP Client Status:
--------------------
VMPS VQP Version:
Reconfirm Interval: 60 min
Server Retry Count: 3
VMPS domain server:
Reconfirmation status
---------------------
VMPS Action:
Cisco Catalyst Blade Switch 3030 Command Reference
2-416
show vmps [statistics] [ | {begin | exclude | include} expression]
(Optional) Display VQP client-side statistics and counters.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
1
other
Chapter 2 Cisco Catalyst Blade Switch 3030 Cisco IOS Commands
78-17262-01