Debug Platform Remote-Commands - Cisco Catalyst 3030 Command Reference Manual

debug platform remote-commands

debug platform remote-commands
Use the debug platform remote-commands privileged EXEC command to enable debugging of remote
commands. Use the no form of this command to disable debugging.
Syntax Description This command has no arguments or keywords.
Defaults
Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.2(25)SEE
Usage Guidelines The undebug platform remote-commands command is the same as the no debug platform
remote-commands command.
Related Commands Command
show debugging
Cisco Catalyst Blade Switch 3030 Command Reference
B-46
debug platform remote-commands
no debug platform remote-commands
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled. For
syntax information, see the Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.
Appendix B Cisco Catalyst Blade Switch 3030 Debug Commands
78-17262-01