Show Env - Cisco Catalyst 3030 Command Reference Manual

show env

show env
Use the show env user EXEC command to display temperature information for the switch.
Syntax Description all
temperature
| begin
| exclude
| include
expression
Note Though visible in the command-line help strings, the fan, power, and rps keywords are not supported.
Command Modes
User EXEC
Command History Release
12.2(25)SEE
Usage Guidelines
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
The show env all command does not display fan or temperature status for the switch.
Note
Examples This is an example of output from the show env all command:
Switch> show env all
I/O Bay
Runtime Status
POST Result
This is an example of output from the show env temperature command:
Switch# sh env temperature
TEMPERATURE is OK
Cisco Catalyst Blade Switch 3030 Command Reference
2-298
show env {all | | temperature} [ | {begin | exclude | include} expression]
Display both fan and temperature environmental status.
Display the switch temperature status.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
: 2
: OK
: OK
Chapter 2 Cisco Catalyst Blade Switch 3030 Cisco IOS Commands
78-17262-01