Show Mvr Interface - Cisco Catalyst 3030 Command Reference Manual

Chapter 2 Cisco Catalyst Blade Switch 3030 Cisco IOS Commands

show mvr interface

Use the show mvr interface privileged EXEC command without keywords to display the Multicast
VLAN Registration (MVR) receiver and source ports. Use the command with keywords to display MVR
parameters for a specific receiver port.
Syntax Description
interface-id
members
vlan vlan-id
| begin
| exclude
| include
expression
Command Modes Privileged EXEC
Command History Release
12.2(25)SEE
Usage Guidelines If the entered port identification is a non-MVR port or a source port, the command returns an error
message. For receiver ports, it displays the port type, per port status, and Immediate-Leave setting.
If you enter the members keyword, all MVR group members on the interface appear. If you enter a
VLAN ID, all MVR group members in the VLAN appear.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show mvr interface command:
Switch# show mvr interface
Port
----
Gi0/1
Gi0/2
78-17262-01
show mvr interface [interface-id [members [vlan vlan-id]]] [ | {begin | exclude | include}
expression]
(Optional) Display MVR type, status, and Immediate Leave setting for the
interface.
Valid interfaces include physical ports (including type, module, and port
number.
(Optional) Display all MVR groups to which the specified interface belongs.
(Optional) Display all MVR group members on this VLAN. The range is 1
to 4094.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Type
----
SOURCE
RECEIVER
Status Immediate Leave
------- ---------------
ACTIVE/UP DISABLED
ACTIVE/DOWN DISABLED
Cisco Catalyst Blade Switch 3030 Command Reference
show mvr interface
2-381