Debug Matm Move Update - Cisco Catalyst 3030 Command Reference Manual

debug matm move update

debug matm move update
Use the debug matm move update privileged EXEC command to enable debugging of MAC
address-table move update message processing.
Syntax Description This command has no arguments or keywords.
Defaults
Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.2(25)SEE
Usage Guidelines The undebug matm move update command is the same as the no debug matm move update command.
Related Commands Command
mac address-table
move update
transmit}
show debugging
show mac
address-table move
update
Cisco Catalyst Blade Switch 3030 Command Reference
B-20
debug matm move update
no debug matm move update
Modification
This command was introduced.
Description
Configures MAC address-table move update feature on the switch.
{receive |
Displays information about the types of debugging that are enabled. For
syntax information, select Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.
Displays the MAC address-table move update information on the switch.
Appendix B Cisco Catalyst Blade Switch 3030 Debug Commands
78-17262-01