Cisco Catalyst 3030 Command Reference Manual page 660

debug platform pm
Though visible in the command-line help strings, the stack-manager keyword is not supported.
Note
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.2(25)SEE
Usage Guidelines
The undebug platform pm command is the same as the no debug platform pm command.
Related Commands Command
show debugging
Cisco Catalyst Blade Switch 3030 Command Reference
B-42
Appendix B
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled. For
syntax information, see the Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.
Cisco Catalyst Blade Switch 3030 Debug Commands
78-17262-01