Debug Ip Igmp Max-Groups - Cisco Catalyst 3030 Command Reference Manual

Appendix B Cisco Catalyst Blade Switch 3030 Debug Commands

debug ip igmp max-groups

Use the debug ip igmp max-groups privileged EXEC command to enable debugging of Internet Group
Management Protocol (IGMP) maximum groups events. Use the no form of this command to disable
debugging.
Syntax Description This command has no arguments or keywords.
Defaults Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.2(25)SEE
Usage Guidelines
The undebug ip igmp max-groups command is the same as the no debug ip igmp max-groups
command.
Related Commands Command
show debugging
78-17262-01
debug ip igmp max-groups
no debug ip igmp max-groups
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled. For
syntax information, select Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.
Cisco Catalyst Blade Switch 3030 Command Reference
debug ip igmp max-groups
B-15