Cisco Catalyst 3030 Command Reference Manual page 180

mac access-group
Examples This example shows how to apply a MAC extended ACL named macacl2 to an interface:
Switch(config)# interface gigabitethernet0/1
Switch(config-if)# mac access-group macacl2 in
You can verify your settings by entering the show mac access-group privileged EXEC command. You
can see configured ACLs on the switch by entering the show access-lists privileged EXEC command.
Related Commands Command
show access-lists
show link state group
show running-config
Cisco Catalyst Blade Switch 3030 Command Reference
2-152
Chapter 2
Description
Displays the ACLs configured on the switch.
Displays the MAC ACLs configured on the switch.
Displays the running configuration on the switch. For syntax
information, select Cisco IOS Configuration Fundamentals Command
Reference, Release 12.2 > File Management Commands >
Configuration File Management Commands.
Cisco Catalyst Blade Switch 3030 Cisco IOS Commands
78-17262-01