Conditional Access To Ip Packet Processor Pages - Comtech EF Data CDM-625A Installation And Operation Manual

Advanced satellite modem (18 kbps – 25 mbps)

Hide thumbs Also See for CDM-625A:

Table of Contents

CDM-625A Advanced Satellite Modem

Ethernet-based Remote Product Management

Conditional Access to IP Packet Processor Pages

Carefully review the information in this section.

A significant number of pages in the CDM-625A Web Server Interface address operation of the

CDM-625A when equipped with the optional IP Packet Processor card. These pages are

accessible only when the optional IP Packet Processor card is installed and enabled .

As specified in Sect. 7.5.1, access to these pages is further restricted to "Admin" (administrative)

users only. If a user with "Read/Write" or "Read Only" user access privileges attempts to select

any IP Packet Processor-specific page, access to that page is prohibited and either of the

following error messages may display in the browser window:

Once logged in, if the Admin user attempts to access any IP Packet Processor-specific page when

the optional IP Packet Processor card is not installed , the following message displays:

Click [Back to previous page] to resume use of the interface.

If the Admin user attempts to access these pages when the optional IP Packet Processor card is

installed but card operation is Disabled , the following message displays:

Click [Back to previous page] to continue any other available operations, or go to the Packet

Processor drop-down list (in the Network Configuration section of the 'Configuration | LAN | IP'

page) to select its operation as Enabled (the modem will automatically reboot).

Table of Contents