Documents You Need At Hand - Fujitsu PRIMERGY RX1330 M3 Upgrade And Maintenance Manual

Before you start
Screw driver/
bit insert
Torque
Phillips
PH1 / (+) No. 1
0.4 Nm
Hexagon bolt
0.6 Nm
Phillips
PH1 / (+) No. 1
0.4 Nm
Table 3: List of used screws (Japan)
2.4

Documents you need at hand

Maintenance procedures may include references to additional documentation.
When preparing the maintenance task, ensure that all required manuals are
available according to the overview below.
I
– Ensure to store all printed manuals enclosed with your server in a
save place for future reference.
– Unless stated otherwise, all manuals are available online at
http://manuals.ts.fujitsu.com
For Japan please use the following address:
http://www.fujitsu.com/jp/products/computing/servers/primergy/manual/
32
Screw
under x86 Servers.
Upgrade and Maintenance Manual
Usage Type
M2.5 x 4 mm
(silver)
TFM
A3C40137316
UNC #4-40x7.8 mm
Front VGA
(silver)
connector
V226827-B265-V5
Front panel on M2.5 x 8 mm
QRL (silver)
C26192-Y10-C174
RX1330 M3