Documents You Need At Hand - Fujitsu PRIMERGY RX1330 M1 Upgrade And Maintenance Manual

Before you start
Screw driver/
bit insert
Phillips
PH1 / (+) No. 1
Phillips
PH1 / (+) No. 1
Table 2: List of used screws (not applicable for the Japanese market)
2.4

Documents you need at hand

Maintenance procedures may include references to additional documentation.
When preparing the maintenance task, ensure that all required manuals are
available according to the overview below.
I
– Ensure to store all printed manuals enclosed with your server in a
save place for future reference.
– Unless stated otherwise, all manuals are available online at
http://manuals.ts.fujitsu.com
For the Japanese market please use the following address:
http://jp.fujitsu.com/platform/server/primergy/manual/
Document
"Quick Start Hardware -
FUJITSU Server PRIMERGY
RX1330 M1" leaflet
"ServerView Quick Start Guide"
" ServerView クイックスタート
ガイド " for the Japanese
market
Table 3: Documentation you need at hand
28
Screw
under x86 Servers.
Description
Quick installation poster for initial operation,
available online
Information on initial server setup and
software configuration, available online
Upgrade and Maintenance Manual
Usage Type
M3 x 4.5 mm
UFM nylon
(white)
screw
C26192-Y10-C151
M2.5 x 4 mm
(silver)
TFM module
C26192-Y10-C103
RX1330 M1