Screw driver /
Bit insert
Torque
Torx PLUS-6IP
0.2 Nm
SW5
0.4 Nm
Phillips
PH2 / (+) No. 2
0.6 Nm
Table 3: List of used screws (Japanese market)
2.4
Documents you need at hand
Maintenance procedures may include references to additional documentation.
When preparing the maintenance task, ensure that all required manuals are
available according to the overview below.
I
– Ensure to store all printed manuals enclosed with your server in a
save place for future reference.
– Unless stated otherwise, all manuals are available online at
http://manuals.ts.fujitsu.com
For the Japanese market please use the following address:
http://www.fujitsu.com/jp/products/computing/servers/primergy/manual/
TX2560 M2 / RX2560 M2
Screw
under x86 Servers.
Upgrade and Maintenance Manual
Usage
Type
Ultraslim
M2 x 4 mm
ODD locking
(silver)
clamp
C26192-Y10-C166
Slot bracket
M3 x 3.5 mm
to controller,
(silver/black)
rack
C26192-Y10-C151
mounting
bracket
5.25-inch
M3 x 6 mm
accessible
(silver/black)
drive dummy
C26192-Y10-C111
module
Before you start
39