Front panel and external connectors
13.2
Front LAN connector
13.2.1 Installing the front LAN connector
Upgrade and Repair Unit
(URU)
Tools: Slot screw driver
13.2.1.1 Preliminary steps
"Disabling or suspending BitLocker functionality" on page 79
Ê
"Locating the defective server" on page 47
Ê
"Shutting down the server" on page 50
Ê
"Disconnecting the server from the mains" on page 50
Ê
"Getting access to the component" on page 51
Ê
"Removing the system fan holder" on page 76
Ê
13.2.1.2 Installing the front LAN connector
Ê Disconnect the front panel cables from the system board as described in
section
"Disconnecting cables" on page
Ê Remove the front panel module from the chassis as described in section
"Removing the front panel module" on page
Ê Remove the front panel module cover from the front panel frame as
described in section
340
"Removing the front panel module cover" on page
Upgrade and Maintenance Manual
Hardware: 10 minutes
329.
331.
TX150 S8 / TX200 S7
334.