Removing The Bbu From The Chassis; Removing The Bbu From The Bbu Holder - Fujitsu PRIMERGY CX250 S2 Upgrade And Maintenance Manual

Ê If applicable, remove all external cables from the server node.
"Removing the server node from the server enclosure" on page 46
Ê
6.7.3.3

Removing the BBU from the chassis

Ê Remove the BBU holder from the chassis as described in section
"Removing the BBU from the system board" on page
6.7.3.4

Removing the BBU from the BBU holder

Figure 90: Removing the BBU from the BBU holder
Ê Remove three screws from the BBU holder.
Ê Remove the BBU.
CX250 S2
Expansion cards and battery backup units
Upgrade and Maintenance Manual
164.
167