Disconnecting The Fbu Adapter Cable From The Tfm; Removing The Fbu Holder From The Chassis; Concluding Steps - Fujitsu PRIMERGY TX140 S1 Upgrade And Maintenance Manual

Ê Open the side / top cover as described in section
on page 67 (rack server) or
server).
Ê Remove the fan module as described in section
on page 208.
9.3.4.3

Disconnecting the FBU adapter cable from the TFM

Figure 137: Disconnecting the FBU adapter cable from the TFM
Ê Disconnect the FBU adapter cable from the TFM.
Ê Remove the FBU adapter cable from the cable clamp (see figure 134).
9.3.4.4

Removing the FBU holder from the chassis

Ê Remove the FBU holder from the chassis as described in section
a BBU from the chassis" on page
9.3.4.5

Concluding steps

Perform the following procedures to complete the task:
Ê Reinstall the fan module as described in section
on page 209.
Ê Close the side / top cover as described in section
on page 80 (rack server) or
server).
TX140 S1
"Removing the side cover" on page 71
267.
"Mounting the side cover" on page 85
Upgrade and Maintenance Manual
Expansion cards and backup units
"Removing the top cover"
"Removing the fan module"
"Installing the fan module"
"Mounting the top cover"
(tower
"Removing
(tower
265